Vyaire CareFusion Viasys Vela

Vyaire CareFusionViasys Vela Specifications

Dimensions

• Pneumatic Module
  • Height: 10.5 in (26.7 cm)
  • Width: 17 in (43.2 cm)
  • Depth: 16 in (40.6 cm)
• User Interface Module
  • Height: 13.75 in (35 cm)
  • Wdth: 16.25 in 941.3 CM)
  • Depth: 2.5 in (6.4cm)
• Viewable size: 12.1 in (diagonal
• Resolution: 800 x 600
• Weight:
  • Ventilator (includes User Interface Module): 83 lb or 37,6 kg
  • Ventilator and Compressor (internal): 90 lb or 40,8 kg

Environmental

• Storage Temperature: -20° to 60° C (-4° to 140° F)
• Operating Temperature: 5° to 40° C (41° to 104° F)
• Barometric pressure: 760 to 545 mmHg

Battery Power

• 1 Hour of Ventilator Use on Internal Battery (Standard) / 30 minutes Ventilator/Compressor
• 8 Hours of Ventilator Use on Internal (Standard) and External (Optional) Battery / 2 hours Ventilator and Compressor

Advanced Gas Blending system

• Air/Oxygen Blending: 21 to 100%
• Internal Heliox Blending System (option): All concentrations up to 80/20

Advanced Patient Monitoring

• Proximal Hot Wire Flow Sensor
• 24-hour trending of monitored respiratory parameters

Electrical / Pneumatic / Input / Output

• Gas Composition FiO2: 21 to 100%
• Pneumatic Input
  • Air / Heliox: 20 to 80 psig (1.38 to 5.52 bar)
  • Compressor (internal): 3 to 10 psig (0.21 to 0.69 bar)
  • Oxygen: 20 to 80 psig (1.38 to 5.52 bar)
• Electrical
  • A/C: 100, 120, 230, 240 VAC, 47 to 65 Hz
  • D/C (Internal/External Battery); 20 to29 VDC
• Data I/O
  • Analog Inputs (x2): 0 to 1, 5 VDC
  • Video Output: SVGA
  • Nurse Call : N.O. or N. C.

Setup

• Humidifier: Active and passive humidification
• Patient setu:p Alphanumeric patient ID
• Leak compensation: ON, OFF

Mode

• Mode type: A/C, SIMV, CPAP/PSV, NPPV (AC, SIMV, CPAP/PSV), PRVC
• Breath type: Volume, pressure, APRV/BiPhasic
• Apnea backup: Volume, pressure

Primary Settings

• Rate: 2 to 80 bpm
• Tidal volume: 50 mL to 2.0 L
• Inspiratory pressure: 1 to 100 cmH2O
• Peak flow: 10 to 140 L/min, (180 L/min spontaneous maximum)
• Inspiratory pause: OFF, 0.1 to 2.0 seconds
• Inspiratory time: 0.3 sec to 10.0 seconds
• Pressure support ventilation: (PSV) OFF, 1 to 60 cmH2O
• PEEP: 0 to 35 cmH2O
• Flow trigger: 1 to 20 L/min
• %O2: 21% to 100% FiO2
• Pressure: high /pressure low 0 to 60 cmH2O/ 0 to 40 cmH2O
• Time high / time: low 0.3 to 30 seconds / 0.3 to
• NPPV Pinsp: 1 to 40 cmH2O
• NPPV PSV: OFF, 1 to 40 cmH2O

Advanced Settings

• Bias flow: 10 to 20 L/min
• Volume limit: 50 mL to 2.5 L (available in PRVC/Vsync only)
• Assured volume: OFF, 50 mL to 2.0 L
• PC flow cycle: OFF to 70%
• PSV cycle: 5% to 70%
• PSV Tmax: 0.3 to 3.0 seconds
• Waveform: Decelerating, square
• T high sync: 0% to 50%
• T high PSV: ON, OFF
• T low sync: 0% to 50%
• Sigh: ON, OFF
• Vsync: ON, OFF

Manual Controls

• Manual breath One breath
• Expiratory hold Maximum 6 seconds
• Inspiratory hold Maximum 6 seconds
• Increase O2 100% O2 for 3 minutes
• MIP/NIF Maximum 30 seconds
• Nebulizer 1 to 60 minutes, synchronized

Alarms

• High pressure 5 to 120 cmH2O
• Low pressure OFF, 2 to 60 cmH2O
• Low minute volume OFF, 0.1 to 99.9 L
• High breath rate OFF, 3 to 150 bpm
• Apnea interval 10 to 60 seconds
• Alarm volume 65 to 85 db at one meter
• Low EtCO2 OFF, 1 to 150 mmHg (0.1 to 20 kPa)
• High EtCO2 OFF, 5 to 150 mmHg (0.7 to 20 kPa)